manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 206

The Spectrum Application (RF Measurements)

R&S

®

FPL1000

206

User Manual 1178.3370.02 ─ 11

For details, refer to 

"Mapping Samples to sweep Points with the Trace Detector"

on page 390.

Remote command: 

[SENSe:]LIST:RANGe<ri>:DETector

 

on page 679

Reference Level

Sets the reference level for the range.

For details on the reference level, see 

Chapter 6.5.1.1, "Reference Level"

,

on page 310.

Remote command: 

[SENSe:]LIST:RANGe<ri>:RLEVel

 

on page 684

RF Attenuation Mode

Activates or deactivates the auto mode for RF attenuation.

For details on attenuation, see 

Chapter 6.5.1.2, "RF Attenuation"

, 

on page 312.

Remote command: 

[SENSe:]LIST:RANGe<ri>:INPut:ATTenuation:AUTO

 

on page 682

RF Attenuation

Sets the attenuation value for that range.

Remote command: 

[SENSe:]LIST:RANGe<ri>:INPut:ATTenuation

 

on page 681

Preamp

Switches the preamplifier on or off.

For details on the preamplifier, see 

"Preamplifier"

 

on page 316.

Remote command: 

[SENSe:]LIST:RANGe<ri>:INPut:GAIN:STATe

 

on page 682

Sweep Points

Sets the number of sweep points for the specified range.

For details on sweep points, see 

Chapter 6.6.1.8, "How Much Data is Measured:

Sweep Points and Sweep Count"

, 

on page 324.

Remote command: 

[SENSe:]LIST:RANGe<ri>:POINts[:VALue]

 

on page 683

Stop After Sweep

This function is not available for the R&S

 

FPL1000.

Transducer

Sets a transducer for the specified range. You can only choose a transducer that fulfills
the following conditions:

●

The transducer overlaps or equals the span of the range.

●

The x-axis is linear.

●

The unit is dB.

Measurements and Results

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands