Ronde & Schwarz 1304.0004.03, User Manual

Page: 922 / 1076

Remote Commands
R&S
®
FPL1000
922 User Manual 1178.3370.02 ─ 09
Parameters:
<FileName> String containing the path and file name of the source file.
<FileName> String containing the path and name of the target file.
Example: MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
MMEMory:MSIS <Drive>
This command selects the default storage device used by all MMEMory commands.
Parameters:
<Drive> 'A:' | 'C:' | … | 'Z:'
String containing the device drive name
*RST:
n.a.
MMEMory:NAME <FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with
HCOPy[:IMMediate<1|2>]
.
Note that you have to route the printer output to a file.
●
It defines the name and directory of a test report.
Parameters:
<FileName> String containing the path and name of the target file.
Example: MMEM:NAME 'C:\Data\PRINT1.BMP'
Selects the file name.
Manual operation: See "Report Path" on page 489
See "Save" on page 498
MMEMory:NETWork:DISConnect <Drive>[, <State>]
This command disconnects a network drive.
Parameters:
<Drive> String containing the drive name.
<State> 1 | 0 | ON | OFF
Optional: determines whether disconnection is forced or not
1 | ON
Disconnection is forced.
0 | OFF
Disconnect only if not in use.
*RST:
0
Managing Settings and Results