Ronde & Schwarz 1304.0004.03, User Manual

Page: 842 / 1076

Remote Commands
R&S
®
FPL1000
842 User Manual 1178.3370.02 ─ 09
Example: CALC:DELT:MODE ABS
Absolute delta marker position.
CALCulate<n>:DELTamarker<m>:MREFerence <Reference>
This command selects a reference marker for a delta marker other than marker 1.
The reference may be another marker or the fixed reference.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Reference> FIXed
Selects the fixed reference as the reference.
Example: CALC:DELT3:MREF 2
Specifies that the values of delta marker 3 are relative to marker
2.
Manual operation: See "Reference Marker" on page 263
CALCulate<n>:DELTamarker<m>[:STATe] <State>
This command turns delta markers on and off.
If necessary, the command activates the delta marker first.
No suffix at DELTamarker turns on delta marker 1.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: CALC:DELT2 ON
Turns on delta marker 2.
Manual operation: See "Marker State" on page 262
See "Marker Type" on page 263
See "Select Marker" on page 264
CALCulate<n>:DELTamarker<m>:TRACe <Trace>
This command selects the trace a delta marker is positioned on.
Note that the corresponding trace must have a trace mode other than "Blank".
Setting Basic Spectrum RF Measurement Parameters