General Instrument Setup
R&S
®
FPL1000
523
User Manual 1178.3370.02 ─ 09
Figure 9-1: Inserting the Windows icon in the toolbar
3. To add an icon that is currently not visible:
a) Select "More icons".
All hidden icons are displayed in a menu.
b) Drag the icon from the menu to the toolbar.
The added icon is displayed. If the toolbar contains too many icons to display,
the icons from the bottom move to the menu.
4. To hide an icon from the toolbar, drag and drop it outside the toolbar.
The icon is moved to the menu of hidden icons ("More icons"). Empty spaces are
indicated by a spacer.
5. To insert additional spaces between icons, for example to create groups of icons:
a) Select "More icons" > "Drag Spacer".
b) Drag and drop the "Drag Spacer" at the required position in the toolbar. Multiple
spaces can be inserted.
6. To restore the default R&S
FPL1000 toolbar, select "More icons" > "Set to Default".
7. To exit the toolbar edit mode, select "More icons" > "Stop Editing".
The red highlighting is removed. Selecting an icon performs the assigned function
as usual.
9.7
Transducers
9.7.1
Basics on Transducer Factors
The transducer allows you to manipulate the trace at discrete trace points to correct
the signal coming from an input device. Transducers are often used to correct the fre-
quency response for antennas, for example. The transducer is configured by defining
Transducers
