manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, User Manual

Share
Download
Ronde & Schwarz 1304.0004.03 User Manual Download Page 448

The Spectrum Application (RF Measurements)

R&S

®

FPL1000

448

User Manual 1178.3370.02 ─ 09

Decimal Separator

Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.

Remote command: 

FORMat:DEXPort:DSEParator

 

on page 918

Export Trace to ASCII File

Saves the selected trace or all traces in the currently active result display to the speci-
fied file and directory in the selected ASCII format.

If the spectrogram display is selected when you perform this function, the entire histo-
gram buffer with all frames is exported to a file. The data for a particular frame begins
with information about the frame number and the time that frame was recorded. For
large history buffers the export operation can take some time.

For details on the file format in the Spectrum application, see 

Chapter 7.13.6, "Refer-

ence: ASCII File Export Format"

, 

on page 451.

Remote command: 

MMEMory:STORe<n>:TRACe

 

on page 836

MMEMory:STORe<n>:SPECtrogram

 

on page 942

Importing and Exporting Measurement Results for Evaluation

Summary of Contents for 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands