Copyright ROMPA® Ltd
SOFT TOUCH SLITTER SEAT 19196-19200 SW 2.08
SOFT TOUCH SLITTER SEAT 19196-19200
CONTENTS
1 x Soft Touch Slitter Seat
1 x 5 point harness installed on the seat
2 x Attachment Straps installed on the seat
USE
The Slitter Seat is to be used on a chair. Please make sure the chair is stable and will take the
weight.
There are a total of four knuckles on the 5 point harness.
Press both sides of each buckle at the same time to release the buckle. To engage the buckle,
push the two ends together so that you hear a click. The crotch strap can be adjusted for depth
with the plastic slide.
Secure tightly the rear strap around the back of the chair.
Secure tightly the bottom strap under the seat of the chair.
CARE & MAINTENANCE
Wipe off accidental marks/liquids using a mild detergent and a damp cloth, avoiding
excessive amounts of water.
To extend the life of the hook and loop straps, comb out the hook portion (hard side) to remove
lint and other debris.
