Copyright ROMPA® Ltd
PORTABLE BALL POOL 17538, KH 5.10
PORTABLE BALL POOL 17538
CONTENTS
6 wall sections
A
ball pool liner/bag
B
600 balls
ASSEMBLY
1.
Release the toggle clip on the liner/bag and loosen the drawstring so that it will run freely
as you open the top of the liner/bag.
2.
Place the liner/bag with the Velcro flaps on the outside and the drawstring at the top and
centre. Ensure the
base of the liner and
the lower flaps sit
flat on the floor.
3.
Place a wall section on the edge of the liner with the longest side facing inwards. Make
sure the edge of the base of the section is flush with the inside base of the liner.
4.
Locate and fasten together the Velcro on the base of the liner with the Velcro on the
base of the wall section.
5.
Work round the hexagon and repeat Step 3 with the other wall sections.
B
