35
• Close the cover and turn the function levers (1) to position “READY” (fig. U2).
• Start the automatic vacuum-sealing process by pressing the button “marinating” (2F) (fig. U3 and U4).
The blue LED glows during vacuum-sealing and blinks in periods of rest.
• After the third vacuum sequence (ca. 14 minutes), the appliance switches off automatically and there is
an audible signal.
• Disconnect the connection hose (16) from the container first and then from the appliance.
If you want to store the food in marinade in vacuum, turn the knob to position “CLOSED” for
closing.
• For stopping the marinate function, press the button “cancel” (2I) or turn the function levers (1) to
“OPEN”.
• For repeating the marinate function disconnect the hose from the container and wait until the container
has filled with air. Then, connect the parts again (knob in position “OPEN“) and start the marinate
process again by pressing the button “marinating” (2F).
• The appliance can be interrupted any time by pressing the button “cancel” (2I) or by turning the
function lever (1) to “OPEN”.
Cleaning and maintenance
ATTENTION: Always unplug the appliance before cleaning!
Never immerse casing, power cord and plug in water or clean
them under running water!
ATTENTION! Hazard of injury and burns!
The sealing bar (6) is getting hot during use! Let the appliance
cool down before cleaning!
• Prior to cleaning the appliance or accessories, please wash your hands thoroughly.
• Clean the upper part of casing with a moist cloth and a mild washing-up liquid before and after each
use. Should any liquid get into the appliance, under no circumstances connect the appliance to the
mains, but contact your service point.
• In order to remove pollution inside the vacuum chamber (8), remove the complete tray (10) to the front
and clean it in the upper dishwasher rack. For inserting the tray (10) again after cleaning, press it down
until the lateral detentions snap in place.
• Do not use any abrasives or solvents!
• Do not scratch the appliance with sharp or pointed objects (knives, scissors etc.).
• Never use a steam jet appliance for cleaning!
• Worn out, deformed or damaged gaskets must be replaced in order to grant proper working of the