Roma Medical Reno II P319, User Manual, Page: 3 / 24

Introduction
Congratulations on your purchase of the ROMA Reno powerchair. This powerchair
incorporates the latest innovative designs. The ROMA Reno can be used in confined
spaces both indoors and out. The powerchair can be easily dismantled without tools
and will fit into the boot of vehicles for easy transport or stored neatly indoors. The
detachable battery pack allows convenient charging wherever necessary.
Intended Use
The ROMA Reno was carefully designed for indoor or outdoor use in paved pedestrian
areas by a single individual with limited mobility up to a maximum weight of 136kg
(21st).
Your assessor/healthcare professional will determine the suitability of the powerchair for
each individuals intended use.
Note: Persons with lower body amputations should not use this device unless evaluated
with artificial limbs fitted, as stability may be compromised due to an irregular centre of
gravity.
Technical Specification
Class 1 Medical Device (93/42/EEC as amended by 2007/47/EC)
Class 2 Indoor/Outdoor Vehicle (Use of Invalid Carriages on Highways Act)
Overall Size Seat Dimensions
Length 870mm Width 460mm
Width 570mm Depth 380mm
Height 860mm Seat to footrest 430 - 520mm
Battery 22Ah Backrest height 410mm / 16”
Height (Seat
Removed)
420mm Range (Up To) 20km (12.5m)*
Maximum user
weight
136kg / 21 st Seat to floor 530mm
Safe working
slope
6º
Battery charger (off
board)
4 amp
Weight with
battery
59.5kg Turning radius 700mm
Max. Speed 6km/h (4mph) Battery pack weight 14kg
*
Passenger weight, rough ground conditions, low temperatures and battery condition
can affect maximum range.
Component Weights:-
Battery Pack – 14kg Seat – 11.5kg
Rear Chassis – 20kg Front Chassis – 14kg
3