Rolls-Royce Helicon X3, User Manual

Page: 19 / 140

System Description
3
Page 5 of 16 Doc. No.: 13S000411
Revision: A Copyright © 2010 Rolls-Royce plc
Figure 1 Lever
3.2 Control Panel
The control panel (touch screen) is the main user interface for the operator and gives an
overview of all the thrusters on the vessel. It shows the status of the system, indicates
thruster forces, displays alarms, and shows selected modes. The flat button on the top of
the screen is for dimming the illumination of the LCD display.
The screen is divided in two areas: a menu area in the left part of the screen, and a bigger
command area to the right. The menu buttons to the left selects the content of the
command area.
Symbol Command Description
In operation/running Thruster is started and ready to use.
Control transfer Transfer command between bridge and ECR.
Command transfer Take command. If light is lit, the lever is in command.
Backup control Independent controller that takes over if the main
controller stops. Redundant system.
Alarm Alarm indicator, see alarm screen for details.