Temperature setting
Set the temperature by positioning the thermostat (n°2 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level of
temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. You must adapt
the temperature to products to be cooked to limit the energy consumption.
Stopping the appliance
Set thermostat control knob (n°2 on picture) on 0: the appliance is no longer func-
tioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
During non
-
prolonged use, we recommend you to grease the plate
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after
-
sales service and
confide any technical operation to qualified person.
When you contact the after
-
sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
-
Let cool completely the device before any technical intervention or cleaning.
-
Clean your crepe machine regularly after each use to avoid phenomenon of cala-
mine. Calamine is the result of the cooking of the sugar and dough which accumulates
very quickly, and creates a film on the plate which harms in the cooking quality.
-
For cleaning, only use non
-
abrasive products, clean regularly the external walls of
your device with warm water and wash liquid: avoid the abrasive towelling. Rinse your
device with a wet sponge. Dry it with a soft cloth
-
Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
-
Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
-
During a prolonged non
-
use, we recommend you strongly to keep the device shield-
ed from the humidity and to grease the plate.
15
