8
Easy Spring Plus
Roller Roman Fabrication
8. Insert the Stop
(opposite side from spring)
9. Determine number of pre-rotations needed, then pre-rotate the Spring.
The number of spring pre-rotations are determined by the length and weight of the shade.
Refer to the Pre-rotation Charts
(next page)
and follow the steps below:
In the “
Pre-rotations by Shade Length
” chart, find the LENGTH of your shade on the left side
axis. Then move horizontally across to the plotted line, and then vertically down to the
bottom axis to find the number of pre-rotations required for your shade's LENGTH.
Next In the “
Pre-rotations by Shade Weight
” chart, find the WEIGHT of your shade on the
left side axis. Then move horizontally across to the plotted line, and then vertically down to
the bottom axis to find the number of pre-rotations required for your shade's WEIGHT.
Add the total from both charts together for the total number of pre-rotations. The total can-
not exceed 50 pre-rotations.
Using the pre-rotation tool, rotate the spring
clockwise
to
set the tension. Before removing handle, rotate the handle
1/4 turn backwards to set the lock. Roller tube must be hor-
izontal for lock to work properly.
Easy
Spring
Plus
CORDLESS SHADE SYSTEM
by Rollease Acmeda
