5
Deductions
Step 1. Determine Size of Dustboard
Step 2.
Cut headrail 1” smaller than dustboard
(leaving
1/2
” on each side of dust board. See diagram below)
Step 3.
Cut Tube 1-3/8” smaller than headrail
(leaving 11/16” on each side of headrail. See diagram below)
Diagram
Example – 40” Shade
1. Make sure you have a clean working area.
2. Lay all parts on fabrication table.
3. Assemble Roman shade panel with lift cord (per your usual method).
4. Use 1”x 3” or 1”x 2” true covered dust board (per usual method).
To Begin:
Tools Required
1. Tape measure (with 16th increments)
2. Scissors
3. Screw gun
4. Metal saw (for cutting rail and tube)
Easy
Spring
Plus
CORDLESS SHADE SYSTEM
by Rollease Acmeda