rollease acmeda AUTOMATE AU, Manual, Page: 5 / 20

5 | Automate
™
Programming Instructions | FT Tubular Motors ROLLEASE ACMEDA
1
2
3
Disconnect the mains power supply.
Connect the motor according to the information in the table below.
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
Power OFF
Water proof connector
Power Cord
2 WIRING, MODES & ZONES
MOTOR POWER NEUTRAL LIVE EARTH
MT01-1145-050001 220-240V AC 50Hz Blue Brown Yellow/Green
DO NOT REMOVE THIS LABEL
WARNING
E L E C T R I C A L H A Z A R D !
Power shall only be supplied to this
cable once male & female
connectors are correctly coupled.
Isolate power prior to connecting or
disconnecting this motor.
This connector must not be acces-
sible to the end user. It shall be
placed within a pelmet box or within
a housing in accordance to
AS/NZS 60335.1:2011 or
(BS) EN 60335-1:2012
Failure to do so could compromise
personal safety.
DO NOT REMOVE THIS LABEL
WARNING
E L E C T R I C A L H A Z A R D !
Power shall only be supplied to this
cable once male & female
connectors are correctly coupled.
Isolate power prior to connecting or
disconnecting this motor.
This connector must not be acces-
sible to the end user. It shall be
placed within a pelmet box or within
a housing in accordance to
AS/NZS 60335.1:2011 or
(BS) EN 60335-1:2012
Failure to do so could compromise
personal safety.
MOTOR POWER CORD LENGTH POWER NEUTRAL LIVE EARTH
MT01-1145-069003 118 in. (3000mm)
120 VAC /
60Hz
White Black Green
P1 button on motor head
P1 button on motor head
3
2
1
2.2 US FT Motors
2.1 AU FT Motor