Rolando Texart XT-640, User Manual

Page: 74 / 156

Maintenance That Should Be Performed More than Once a Month
3
Maintenance
72
Manual Cleaning
CAUTION
Be sure to perform operations as specified in the instructions, and never
touch any area not specified in the instructions.
Failure to observe these instructions may cause the machine to move suddenly,
resulting in injury.
1.
Enter manual cleaning mode.

Remove any media.

Press .

Press several times until the screen on the left
appears.
Press .
Important notes on this procedure
 Before attempting this operation, remove any media.
 To prevent the print heads from drying out, finish this procedure in 30 minutes or less. A warning
beep sounds after 30 minutes.
 Never use any implements other than the included cleaning sticks. Cotton swabs or other lint-pro-
ducing items may damage the print heads. If you use up the cleaning sticks, contact your authorized
Roland DG Corp. dealer.
 Use one cleaning stick per cleaning session, and then discard the stick after use. Reusing cleaning
sticks will adversely affect the printing results.
 Never rub the print head surface (nozzle surface).
 Stroke the sponges very gently, applying as little pressure as possible. Never rub, scrape, or crush
them.
If a warning beep sounds during cleaning
A warning beep sounds 30 minutes after operation starts. Temporarily stop work, attach the left and
right covers, and then close the front cover. Press
to finish manual cleaning mode. After
that, restart operation from the first procedure.
Required items
MENU
SUB MENU
Cleaning sticks