Rolando Texart XT-640, User Manual

Page: 59 / 156

57
2
Basic Operation
Switch Off
Switch Off
WARNING
When output is not being performed, remove any loaded media or switch
off the sub power.
The continued application of heat at a single location may cause the release
of toxic gases from the media or pose a fire hazard.
Procedure

Switch off the sub power whenever printing
is finished.
Hold down the sub power switch for one second
or longer.

Raise the loading lever and remove the
media.
When not using the machine, raise the loading lever
even if the sub power is on.
Leave the main power switched on at all times.
Never switch off the main power. When the main power is on, the automatic maintenance function is
carried out periodically. If the automatic maintenance is not carried out, the printer may malfunction.
For example, the print heads may be damaged.
Never switch off the main power or unplug the power cord suddenly while operation is in
progress.
Switching off the main power or unplugging the power cord suddenly while operation is in progress
may damage the print heads. Be sure to first switch off the sub power. If the main power is accidentally
switched off, immediately turn the main and sub power back on.
When not using the machine, remove any media and store it in a suitable environment.
If the machine is left with the media loaded, the media may be damaged, which may be adversely
affect printing. When not using the machine, remove any media and store it in a suitable environment.

P. 19 "Media Storage Environment"