Rolando Texart XT-640, User Manual

Page: 51 / 156

Print
2
Basic Operation
49

When the location is set, press .
lights. When the screen displays the character "B" together
with the output-possible width at the location, setting is complete.
Printing Tests and Normal Cleaning
Before you carry out actual printing, perform a printing test to ensure no dot drop-out occurs. If dot drop-out
occurs, perform cleaning of the print heads (normal cleaning).
1.
Setting a test print direction
* The factory default setting of the test print direction is "FEED." When performing printing tests successively,
you can select "FEED" or "SCAN" as the print direction applied to the second and later tests. However, when the
optional media take-up system is used, "Feed" is applied regardless of the setting of the test print direction.

P. 115 "Using the Media Take-up System"

Press .

Press several times until the screen on the left
appears.
Press .

Press several times until the screen on the left
appears.
Press .
W1100mm
B
MENU
SUB MENU
SUB MENU
TEST PRINT POS
Output-start location
Output area
Vertical (feed)
direction output-
start location
Horizontal (scan)
direction output-
start location