Rolando Texart XT-640, User Manual

Page: 115 / 156

Accommodating Different Media Types and Conditions
4
Advanced Functions
113
Using Sticky Media
Procedure

Press .

Press several times to display the screen shown
on the left.
Press .

Press several times to display the screen shown
on the left.
Press .

Press or to select "ENABLE."
Press to confirm your entry.

Press , then to go back to the original screen.
Description
Some types of media may tend to stick to the platen. Starting printing with the media sticking to the platen
may make normal media feed impossible and cause the media to jam. When using such media, set the [MEDIA
RELEASE] menu item to "ENABLE." This peels off the media before starting printing if it is stuck to the platen.
Note, however, that media feed may be unstable when printing is performed after executing this operation.
Leave this menu item set to "DISABLE" unless you specifically need to change it.
Default Setting
[MEDIA RELEASE]: DISABLE
MENU
SUB MENU
SUB MENU
MEDIA RELEASE
MEDIA RELEASE
DISABLE ENABLE