9
Before you use the VS8F-3
Rules for installing effect expansion boards
■
What is the Key Card?
It is necessary to authorize the effect programs with individual ID of your VS8F-3 prior to
installing and using the effect programs on the VS series device. The VS8F-3 used for the
authorization is called the “Key Card.” The VS plug-in programs can function when a Key
Card is present. To authorize the effects programs with the Key Card correctly, the Key
Card must be installed according to the rules stated below.
■
Rule 1
On the VS-2480/2480CD/2400CD, effect expansion boards must be installed in order
starting from EFFECT A (the first one).
On the VS-2000, effect expansion boards must be installed in order starting from EFFECT
B (the first one).
You must not leave the first effect slot vacant, or skip any slots when you install boards.
■
Rule 2
When installing the VS8F-3, you must install it as follows in conformity with Rule 1. When
the VS8F-3 in the first slot (the Key Card, shown here in bold type) is authorized, Key Card
data is written to the hard disk together with the VS plug-in program.
VS-2480/2480CD
A
B
C
D
VS8F-3: x1
VS8F-2: not installed
VS8F-3
VS8F-3: x1
VS8F-2: x1
VS8F-3
VS8F-2
VS8F-3: x2
VS8F-2: not installed
VS8F-3
VS8F-3
VS8F-3: x2
VS8F-2: x1
VS8F-3
VS8F-3
VS8F-2
VS8F-3
VS8F-2
VS8F-3
VS8F-3: x1
VS8F-2: x2
VS8F-3
VS8F-2
VS8F-2
VS8F-3: x1
VS8F-2: x3
VS8F-3
VS8F-2
VS8F-2
VS8F-2
VS8F-3: x3
VS8F-2: not installed
VS8F-3
VS8F-3
VS8F-3
VS8F-3: x3
VS8F-2: x1
VS8F-3
VS8F-3
VS8F-3
VS8F-2
VS8F-3
VS8F-3
VS8F-2
VS8F-3
VS8F-3
VS8F-2
VS8F-3
VS8F-3
VS8F-3: x2
VS8F-2: x2
VS8F-3
VS8F-3
VS8F-2
VS8F-2
VS8F-3
VS8F-2
VS8F-3
VS8F-2
VS8F-3
VS8F-2
VS8F-2
VS8F-3
VS8F-3: x4
VS8F-2: not installed
VS8F-3
VS8F-3
VS8F-3
VS8F-3
VS-2400CD
A
B
VS8F-3: x1
VS8F-2: not installed
VS8F-3
VS8F-3: x1
VS8F-2: x1
VS8F-3
VS8F-2
VS8F-3: x2
VS8F-2: not installed
VS8F-3
VS8F-3
VS-2000
A (internal)
B
C
VS8F-3: x1
VS8F-2: not installed
equivalent to
VS8F-2
VS8F-3
VS8F-3: x1
VS8F-2: x1
VS8F-3
VS8F-2
VS8F-3: x2
VS8F-2: not installed
VS8F-3
VS8F-3
For details, refe
r to
If you affix the included
Key Card sticker to the
authorized VS8F-3
installed in the first slot,
you'll be able to
distinguish it from other
VS8F-3 boards.
The VS8F-3 cannot use
effects created for the
VS8F-2. Nor can the
VS8F-2 use plug-in effects
created for the VS8F-3.
When the VS-2400CD is
shipped from the factory, a
VS8F-2 is installed in slot
A. If you want to use a
VS8F-3, you must move
the VS8F-2 to slot B or
remove it.
VS8F-3
=Key Card
VS8F-3=not Key Card
Summary of Contents for VS8F-3
Page 34: ...34 Memo ...