Roland VS-1680 V-XPANDED, User Manual, Page: 82 / 282

82
Chapter 5 Using the Digital Mixer
fig.11-43
Copying Mixer Settings
You can copy mixer settings—equalizer settings and levels—
from another channel to the channel currently shown in the
Channel Edit page.
The following settings can be copied.
Equalizer
EQ low freq
EQ low gain
EQ mid freq
EQ mid gain
EQ mid Q
EQ high freq
EQ high gain
Level
ATT
Phase
EFX1 insert send level
EFX1 insert return level
EFX2 insert send level
EFX2 insert return level
EFX3 insert send level
EFX3 insert return level
EFX4 insert send level
EFX4 insert return level
Fader
MASTER send pan
EFX1 send level
EFX1 send pan
EFX2 send level
EFX2 send pan
EFX3/AUX1 send level
EFX3/AUX1 send pan
EFX4/AUX2 send level
EFX4/AUX2 send pan
AUX/AUX3 send level
AUX/AUX3 send pan
1.
Press [SELECT)] for the copy-destination channel.
2.
Press [PAGE] so that [F5] indicates “Copy,” and then
press [F5 (Copy)].
3.
Turn the TIME/VALUE dial to select the copy-source
channel.
If the channel-linking is off for the copy-destination channel, the
channel-linking of the copy-source channel will also be considered
to be off even though it may actually be on, and only the settings of
individual channels will be copied. Similarly, when channel-linking
is on for the copy-destination channel, channel-linking of the copy-
source channel will also be considered to be on, even though it may
actually be off, and the settings of both channels will be copied.
4.
Use the function buttons to select the settings to will be
copied.
[F1 (CpyEQ] : Copy only the equalizer settings.
[F2 (CpyLv] : Copy only the level settings.
[F4 (Exec] or [ENTER (YES)]
: Copy both the equalizer
and level settings.
[F6 (EXIT] or [EXIT (NO)]
: Exit without copying.
The third
HOT
The second
HOT
The second
HOT
Mixer Amplifier Speaker
The third
HOT
The second
HOT
Mixer Equalizer Amplifier Speaker
The third
HOT