Roland VS-1680 V-XPANDED, User Manual, Page: 61 / 282

61
Chapter 4 Recording Operations
Chapter 4
fig.03-12
Using Markers
1.
Place two markers, one at the desired punch-in point,
and one at the desired punch-out point.
2.
Move to the marker which corresponds with the punch-
in point.
3.
Hold [AUTO PUNCH], and press [NEXT].
4.
Without releasing [AUTO PUNCH], press [PREVIOUS].
fig.03-13
Programming Points During Song Playback
1.
Press [PLAY] to begin song playback.
2.
Press and hold [AUTO PUNCH] as the song is playing.
When you reach the desired punch-in location, press
[TAP].
3.
Continue to hold [AUTO PUNCH]. When you reach the
desired punch-out point, press [TAP] again.
4.
Press [STOP].
fig.03-14
Editing Punch-In and Punch-Out Points
1.
Hold [SHIFT] and press [AUTO PUNCH].
fig.03-15a
2.
The punch-in and punch-out values appear in the
display. Use [ ][ ], [ ], [ ], and [ ]
and [ ] to move the cursor to the value you want to
adjust. If no value is stored, “—h—m—s—f ——”
appears in the display.
The function buttons work as listed below.
[F1 (In)]:
Moves the cursor to the punch in location.
[F2 (NOW)]:
Enters the current time as the punch-in or punch-out
point, depending on which parameter is highlighted.
[F3 (JUMP)]:
Moves the time line to the currently stored punch-in or
punch-out point, depending on which is highlighted.
[F4 (Out)]:
Moves the cursor to the punch-out location.
[F6 (EXIT)]:
Exits the screen. Returns to the Utility menu screen.
3.
Enter the new value using the TIME/VALUE dial.
4.
When you are done making changes, press [PLAY
(DISPLAY)] to return to the Playlist display.
Recording Procedure When Using Auto
Punch
1.
Hold [REC] and press the STATUS button for the track
you wish to re-record. It begins blinking red.
2.
Press [ZERO] to return to the beginning of the song.
3.
Press [PLAY] to begin song playback. At this point, you
will hear the performance that has already been recorded
on the track.
4.
Press the STATUS button. The indicator alternately
blinks red and orange. Confirm that you can hear the
source you want to record in the monitors or
headphones.
5.
During playback of the song, each time the STATUS
button is pressed, you will alternately hear the
previously recorded track, and then the source (input). If