manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 258 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 258

258

Chapter 22 Specific Applications

Preparations for Compu Mix

1.

Make connections as shown below.

fig.13-07

2.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu appears in the display.

If the System Menu does not appear, press [F6 (EXIT)].

3.

Press [F4 (MIDI)]. If “MIDI” does not appear above [F4], 
press [PAGE] until “MIDI” appears, then press [F4 
(MIDI)].

4.

Use [

], [

], [

], and [

] to move the 

cursor and use the TIME/VALUE dial to make settings 
for each parameter as described below.

MIDI Thru (MIDI Thru Switch)

For this application, set this to “OUT.”

Cntrl Local (Control Local Switch)

For this application, set this to “On.”

Control Type (Mixer Control Types)

For this application, set this to “C.C..”

5.

Follow the procedure described in “Synchronizing with 
MIDI Sequencers” ("Synchronizing with MIDI 
Sequencers," p. 189) to make the necessary settings in 
both the VS-1680 and the MIDI sequencer to synchronize 
the two machines. Make sure to set the MIDI sequencer 
so MIDI messages received at the MIDI In connector are 
not output from the MIDI Out connector.

Recording with Compu Mix

1.

Prepare the VS-1680’s initial mixer settings (e.g. panning, 
faders, EQ, etc.) during song playback. Then press 
[STOP] and rewind to the beginning of the song.

2.

Put the MIDI sequencer into Record mode, and press 
[PLAY] on the VS-1680.

3.

As soon as playback of the VS-1680 starts, immediately 
hold [SHIFT] and press [SCENE]. The mixer’s initial 
settings are transmitted from the MIDI OUT connector.

4.

As the song continues to play, make adjustments to the 
faders and other mixer settings as desired.

5.

When the song is finished playing, stop the MIDI 
sequencer and the VS-1680.

This completes recording with Compu Mix. When you 
rewind to the beginning of the MIDI sequence and the
VS-1680 song and then begin playback, all mixer settings are 
controlled according to the Compu Mix. Save the MIDI song 
file to a floppy disk or other storage media.

Synchronizing with Video 
Equipment

When used in combination with the optional Roland SI-80S 
LANC to MTC Converter, you can control the Play and Stop 
functions of the VS-1680 using consumer video equipment. 
This video equipment must provide a consumer video 
interface that conforms to RCTC time code. On many video 
products, this interface is labeled “LANC.” Make your 
connections as shown below, and refer to the SI-80S Owner’s 
Manual and the owner’s manual for your video device.

1.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu icon appears in the display. If the System Menu 
icon does not appear, press [F6 (EXIT)].

2.

Press [F4 (MIDI)]. If “MIDI” does not appear in the 
display above [F4], press [PAGE] until “MIDI” appears, 
and then press [F4 (MIDI)].

3.

Use [

], [

], [

], and [

] to move the 

cursor and use the TIME/VALUE dial to change the 
setting.

SysEx.Rx (System Exclusive Receive Switch)

For this application, set this to “On.”

MMC (MIDI Machine Control)

For this application, set this to “SLAVE.”

MIDI OUT

MIDI Sequencer

MIDI OUT

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments