manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 245 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 245

245

Chapter 21 System and Global Settings

Chapter 21

Global Settings

These are settings related to the overall operation of the VS-
1680. Unlike system settings, these settings are not set on a 
song-by-song basis.

Shift Lock

Many functions in the VS-1680 are accessed by holding 
[SHIFT], and then pressing a second button. If you find it 
inconvenient to use two hands, you can set Shift Lock to 
temporarily lock in the [SHIFT] button. This allows you to 
perform most [SHIFT] functions with one hand.

1.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu icon is displayed. If the System Menu icon does 
not appear, press [F6 (EXIT)].

2.

Press [F2 (GLOBL)]. If “GLOBL” does not appear above 
[F2], first press [PAGE] until “GLOBL” appears, and then 
press [F2 (GLOBL)].

3.

Use [

], [

], [

], and [

] to move the 

cursor to “Shift Lock.”

4.

Use the TIME/VALUE dial to change the setting for Shift 
Lock.

Shift Lock

Set this to “On” to enable the Shift Lock function.

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

6.

The [SHIFT] button indicator lights on and off each time 
the button is pressed. [SHIFT] is in effect when the 
indicator is lit. The [SHIFT] state changes when another 
button is pressed or the TIME/VALUE dial is turned.

Numerics Type

When using the Jump function, or typing in the values of a 
punch-in point, you can use the LOCATOR buttons to enter 
numbers directly. The setting for Numerics Type determines 
how the numbers are entered.

1.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
Menu icon is displayed. If the System Menu icon does 
not appear, press [F6 (EXIT)].

2.

Press [F2 (GLOBL)]. If “GLOBL” does not appear above 
[F2], first press [PAGE] until “GLOBL” appears, and then 
press [F2 (GLOBL)].

3.

Use [

], [

], [

], and [

] to move the 

cursor to “NUMERICS Type.”

4.

Use the TIME/VALUE dial to change the setting for 
Numerics Type.

NUMERICS Type

This sets how numerals are entered when you use the 
LOCATOR buttons as a numbering keypad.

Up:

Numerals are entered from lower-place digits on up 
(from the right).

Down:

Numerals are entered from higher-place digits on 
down (from the left).

5.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Shift Lock Shortcut

You can quickly toggle the Shift Lock feature on and off 
by holding down [SHIFT] and pressing [YES].

To

To Display the Song Menu Icon

1.

Press [SHIFT] and immediately release the button.

The button indicator lights. When the level meter is 
not displayed, “SHIFT” appears in the upper left 
part of the display and indicates the Shift Hold 
function is in effect.

2.

Press [F1 (SONG)]. The [SHIFT] button indicator 
goes off, and the Song Menu icon appears in the 
display.

When Holding Down [SHIFT]

If [SHIFT] is held down during an operation, the Shift 
Lock function will be ignored. For example, if you hold 
down [SHIFT] and press [F1 (SONG)], Shift Lock will not 
be turned on when you release [SHIFT]. The function of 
[SHIFT] itself remains in effect, so the Song Menu icon is 
displayed.

In some cases, it is possible to quickly change value 
settings by holding [SHIFT] while turning the TIME/
VALUE dial. Depending on what value is being 
changed, holding [SHIFT] while turning the TIME/
VALUE dial will change the values by a factor of 10, or 
in other cases, by a factor of 1/10.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments