manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 241 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 241

241

Chapter 20 Compatibility with Other VS Recorders

Chapter 20

Song Export

You can convert the data from the first eight tracks of the 
current song for use with a VS-880/880EX and copy it as a 
new song to an external drive (such as a Zip drive) connected 
to the VS-1680’s SCSI port. This is referred to as “Song 
Export.” All song data, including mixer settings such as EQ 
(where applicable) and Stereo Link, system settings such as 
sync tracks and tempo maps, locators, markers, effect 
settings, etc., are copied.

Limits of Song Export to VS-880EX and VS-880

Tracks:

1-8

V-Tracks: 1-8

Locators:

Bank 1-Bank 4

Song modes:

MAS, MT1, MT2, LIV

* When the VS-880/880EX imports a song that was exported 

from the VS-1680, it will have both the same sample rate and 
recording mode as the source song.

* If there is insufficient free space on the destination drive, Song 

Export cannot be carried out.

This procedure demonstrates the Song Export procedure 
using an Zip drive (other drives can be used in its place).

1.

Make your connections as shown in the diagram below.

fig.10-04

2.

Select the song you want to export as the current song.

3.

Insert a disk into the Zip drive.

4.

Press [PLAY (DISPLAY)]. 

5.

Hold [SHIFT] and press [F1 (SONG)]. The Song Menu 
icon is displayed.

6.

Press [F5 (Exprt)]. If you do not see “Exprt” in the 
display above [F5], press [PAGE] until you see “Exprt,” 
and then press [F5 (Exprt)].

fig.10-04a

7.

Press [F4 (SelDr)]. A list of drives appears in the display.

8.

Press [

], [

], [

], and [

] to select the 

destination drive (the Zip drive). Then press [F1 (Back)].

fig.10-05

9.

Press [

], [

], [

], and [

] to move the 

cursor, and use the TIME/VALUE dial to select  the 
format for the exported song: VS-880 or VS-880EX.

10.

Press [F4 (Exec)]. A confirmation message appears in the 
display.

11.

Press [YES]. “STORE Current ?” appears in the display.

12.

Press [YES] if you want to save changes made to the 
current song; otherwise, press [NO]. (If the current song 
is a demo song, press [NO].)

13.

After Song Export is completed, the screen returns to the 
Playlist display.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments