manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 240 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 240

240

Chapter 20 Compatibility with Other VS Recorders

1.

Make connections as shown below.

fig.10-01

2.

Insert the Zip disk on which a VS-880/880EX/840/
840EX song has been recorded.

3.

Select the internal drive (IDE hard drive) so that it is the 
current drive (see "Drive Select," p. 222).

4.

Press [PLAY (DISPLAY)]. 

5.

Hold [SHIFT] and press [F1 (SONG)]. The Song Menu 
icon is displayed.

6.

Press [F4 (Imprt)]. If you do not see “Imprt” in the 
display above [F4], press [PAGE] until you see “Imprt,” 
and then press [F4 (Imprt)].

fig.10-01a

7.

Press [F1 (SelDr)]. A list of drives appears in the display.

8.

Press [

], [

], [

], and [

] to select the 

source drive, and use the TIME/VALUE dial to select the 
source drive partition. Then press [F1 (Back)].

fig.10-02

9.

Use the TIME/VALUE dial to move the cursor to the 
song you want to import and press [F4 (Mark)]. When 
[F3 (All)] is pressed, you can place or remove marks from 
all songs. By pressing [F2 (SelSg)], you can view a 
directory of available songs.

fig.10-03

From this screen, select the songs you want to import by 
pressing [F3 (Mark)]. Then press [F1 (Back)].

10.

Press [F5 (Exec)]. A confirmation message appears in the 
display.

11.

Press [YES]. “STORE Current ?” appears in the display.

12.

Press [YES] if you want to save changes made to the 
current song; otherwise press [NO]. (If the current song 
is a demo song, press [NO].) After Song Import is 
completed, the screen returns to the Playlist display. The 
song imported for use by the VS-1680 becomes the 
current song.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments