manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 222 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 222

222

Chapter 17 Using Hard Drives

1.

Confirm that the power on both the VS-1680 and the 
external drive are turned on.

2.

If you are using a removable-type drive, insert a disk into 
the drive.

3.

Press [PLAY (DISPLAY)].

4.

Hold [SHIFT] and press [F6 (UTILITY)]. The Utility 
menu icon appears in the display.

5.

Press [F4 (DrSel)]. If “DrSel” does not appear in the 
display above [F4], first press [PAGE] until “DrSel” is 
displayed, and then press [F4 (DrSel)]. A list of currently 
connected drives appears in the display.

6.

Use [

], [

], [

], and [

] to move the 

cursor. Select the drive that contains the song you wish 
to recover. Use the TIME/VALUE dial to select the 
correct partition (if necessary).

fig.06-06

7.

After you have selected the drive and partition, press [F4 
(Exec)].

8.

A confirmation message appears in the display. Press 
[YES].

9.

“STORE Current ?” appears in the display. Press [YES] if 
you want to save changes made to the current song, 
otherwise press [NO]. After the current drive changes to 
the one you selected, the screen returns to the Playlist 
display.

10.

Follow the procedure described in "Song Copy Playable" 
(p. 219), to make a copy of the song from the external 
drive to the internal (IDE) drive. Make sure you select the 
IDE drive as the destination drive so that the song is 
copied to the internal drive.

11.

After the Song Copy procedure is complete, repeat Steps 
3-10 to select the internal IDE drive as the current drive 
(select the IDE drive in Step #6).

Drive Select

To select either another partition of your internal (IDE) drive, 
or select another connected SCSI hard drive, use the 
following procedure:

1.

Press [PLAY (DISPLAY)].

2.

Hold [SHIFT] and press [F6 (UTILITY)]. The Utility 
menu appears in the display.

3.

Press [F4 (DrSel)]. If “DrSel” does not appear in the 
display above [F4],first press [PAGE] until “DrSel” is 
displayed, and then press [F4 (DrSel)]. A list of partitions 
on the currently selected drive as well as other external 
SCSI drives connected is displayed.

4.

Use [

], [

], [

], and [

] to move the 

cursor. Select the drive that you wish to make current. 
Use the TIME/Value dial to select the current partition.

Loading a Song from External 
Disks using Song Archive Extract

Use the following procedure to restore a song saved using 
Song Copy Archives.

1.

Select the internal drive as the current drive.

2.

Insert Disk #1 created from a Song Copy Archives into 
the external drive.

3.

Press [PLAY (DISPLAY)].

4.

Hold [SHIFT] and press [F1 (SONG)]. The Song Menu 
icon appears in the display.

5.

Press [F3 (AcExt)]. If “AcExt” does not appear in the 
display above [F3], press [PAGE] until “AcExt” appears, 
and then press [F3 (AcExt)].

fig.06-11

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments