manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 220 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 220

220

Chapter 17 Using Hard Drives

7.

Press [

] to move the cursor to “Destination Drive.”

8.

Use the TIME/VALUE dial to select the destination drive 
and partition. Press [F5 (SelDr)] to view a directory of 

drives. Then use [

], [

], [

], and [

] to 

select the destination drive, and use the TIME/VALUE 
dial to select the partition. Once you have selected the 
destination drive, press [F1 (Back)].

fig.06-09ab

9.

If the source and the destination drives are different, 

press [

]. Move the cursor to “Erase All Songs” and 

use the TIME/VALUE dial to set the value.

Erase All Songs

When this is set to “On,” the destination drive is 
initialized before the copy procedure is performed. If 
you want to perform the Song Copy procedure without 
erasing any songs currently on the destination drive, 
leave this setting “Off.”

10.

Press [F4 (Exec)]. A confirmation message appears in the 
display.

11.

Press [YES]. “STORE Current ?” appears in the display. 
Press [YES] if you want to save changes made to the 
current song, otherwise press [NO].

12.

When the Song Copy Playable procedure is finished, the 
screen returns to the Playlist display.

Song Copy Archives

Use the following procedure to copy a song that cannot fit on 
a single disk:

1.

Select the drive containing the source song you want to 
copy as the current drive.

2.

Press [PLAY (DISPLAY)].

3.

Hold [SHIFT] and press [F1 (SONG)]. The Song menu 
icon is displayed.

4.

Press [F2 (AcStr)]. If “AcStr” does not appear above [F2], 
press [PAGE] until “AcStr” appears above [F2], and then 
press [F2 (AcStr)].

fig.06-10

5.

Press [

] to move the cursor to “Source Song.”

6.

Use the TIME/VALUE dial to move the cursor to the 
song you want to copy and press [F3 (MARK)]. By 
pressing [F2 (ALL)], you can place and remove Marks 
from all songs. Press [F1 (SelSg)] to view a directory of 
songs. From here, after you have Marked the song(s) you 
want to copy, press [F1 (Back)].

fig.06-10a

If “Disk Memory Full” Appears in the 
Display

This indicates the destination drive does not have 
enough free space, or the number of songs on the 
destination drive exceeds the maximum number (200 
songs) that can be stored on the drive. If this message 
appears, the Song Copy procedure is canceled.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments