manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 200 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 200

 

200

Chapter 15 Using External MIDI Devices

 

Using an External MIDI 
Sound Source to Play the 

 

Metronome

 

A MIDI sound source can be used as a metronome in place of 
the VS-1680’s internal metronome. To do this, use the 
following procedure:

 

1.

 

Connect the VS-1680 and the MIDI sound generator as 
shown below.

 

fig.11-27

 

2.

 

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
menu icon appears in the display. If the System menu 
icon does not appear, press [F6 (EXIT)].

 

3.

 

Press [F4 (MIDI)]. If “MIDI” does not appear in the 
display above [F4], press [PAGE] until “MIDI” appears, 
and then press [F4 (MIDI)].

 

4.

 

Use [

], [

], [

], and [

] to move the 

cursor to “MIDI Thru,” and use the TIME/VALUE dial 
to change the setting.

 

MIDI Thru

 

This switches the function of the MIDI OUT/THRU 
connector. The default setting is “OUT.”

 

5.

 

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

 

fig.11-28

 

6.

 

Use [

], [

], [

], and [

] to move the 

cursor to “Sync Gen.,” and turn the TIME/VALUE dial 
to change the setting to “Off.”

 

Sync Gen. (Sync Generator)

 

This determines what type of MIDI synchronization, if 
any, is generated at the MIDI OUT connector on the
VS-1680. You would select “MIDIclk” if you wished to 
use a tempo map, or “SyncTr” to use a sync track.

 

Off:

 

No MIDI signals are transmitted.

 

MTC:

 

MIDI Time Code is transmitted.

 

MIDIclk:

 

The tempo map MIDI Clock is transmitted.

 

SyncTr:

 

The sync track MIDI Clock is transmitted.

 

7.

 

Press [EXIT]. The System menu icon appears in the 
display.

 

8.

 

Press [F5 (METRO)]. The Metronome Parameter screen 
appears in the display.

 

fig.11-29

 

9.

 

Use [

], [

], [

], and [

] to move the 

cursor and use the TIME/VALUE dial to change each of 
the settings.

 

Metronome Out

 

This selects where the metronome is output. For now, 
select “MIDI.” Selecting “Off” prevents you from 
making any settings related to the Metronome.

 

Off:

 

The metronome sound is not output.

MIDI IN

MIDI Sound Generator

MIDI IN B

VOLUME

PHONES

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments