manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 196 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 196

196

Chapter 15 Using External MIDI Devices

Place Markers Along with the Tempo

1.

Press [ZERO].

2.

Press [PLAY] to begin song playback.

3.

While listening to the song, press [TAP] on each beat of 
each measure, for the entire song.

4.

When the song is finished, press [STOP].

Create a Sync Track from Markers

After placing markers at each beat of a song, it is possible to 
convert the marker data into a sync track. This is useful when 
you have already recorded a guitar or vocal performance in 
the VS-1680, and now you want to synchronize a MIDI 
sequencer to the recording.

1.

Hold [SHIFT] and press [EXT SYNC].

2.

Press [F2 (STCnv)].

3.

Press [F1 (TP->ST)].

4.

Press [

] and [

] to move the cursor. Turn the 

TIME/VALUE dial to change each value.

fig.08-13

Beat

Specify the time signature (number of beats per 
measure).

Tap Beat

Specify the number of markers in each measure.

5.

Press [F5 (Exec)].

6.

“Overwrite Tempo Map” appears in the display. Press 
[YES], or to cancel the operation, press [NO].

7.

When the operation is finished, press [PLAY (DISPLAY)] 
to return to the Playlist display.

Create a Tempo Map from Markers

After placing markers for each beat of a song, it is possible to 
convert the marker data into a tempo map. This is useful 
when you have already recorded a guitar or vocal 
performance in the VS-1680, and now you want to 
synchronize a MIDI sequencer to the recording.

1.

Hold [SHIFT] and press [EXT SYNC].

2.

Press [F2 (STCnv)].

3.

Press [F2 (TP->TM)].

4.

Press [

] and [

] to move the cursor. Turn the 

TIME/VALUE dial to change each value.

fig.08-14

Beat

Specify the time signature (number of beats per 
measure).

Tap Beat

Specify the number of markers in each measure.

5.

Press [F5 (Exec)].

6.

“Overwrite Tempo Map” appears in the display. Press 
[YES]. Or, to cancel the operation, press [NO].

7.

When the operation is finished, press [PLAY (DISPLAY)] 
to return to the Playlist display.

Create a Tempo Map from a Sync 
Track

If you have already recorded a VS-1680 sync track from an 
external MIDI source, you can convert it into a tempo map.

1.

Hold [SHIFT] and press [EXT SYNC].

2.

Press [F2 (STCnv)].

3.

Press [F3 (ST->TM)].

4.

Press [

] and [

] to move the cursor. Turn the 

TIME/VALUE dial to change each value.

fig.08-15

Sync Track Beat

Specify the time signature (number of beats per 
measure) for the MIDI clock data recorded in the sync 
track.

5.

Press [F5 (Exec)].

6.

“Overwrite Tempo Map” appears in the display. Press 
[YES], or to cancel the operation, press [NO].

7.

When the operation is finished, press [PLAY (DISPLAY)] 
to return to the Playlist display.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments