manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 195 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 195

195

Chapter 15 Using External MIDI Devices

Chapter 15

3.

When you are finished setting the tempo map, press [F6 
(EXIT)]. The Sync/Tempo screen appears in the display.

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Synchronized Operation

1.

Connect the VS-1680 and the MIDI sequencer as shown 
below:

fig.08-11

2.

Press [PLAY (DISPLAY)].

3.

Hold [SHIFT] and press [F5 (SYSTEM)]. The System 
menu icon appears in the display. If the System menu 
icon does not appear, press [F6 (EXIT)].

4.

Press [F4 (MIDI)]. If “MIDI” does not appear in the 
display above [F4], press [PAGE] until “MIDI” appears, 
and then press [F4 (MIDI)].

5.

Use [

], [

], [

], and [

] to move the 

cursor to “MIDI Thru,” and use the TIME/VALUE dial 
to change the setting.

MIDI Thru

This switches the function of the MIDI OUT/THRU 
connector. For this application, use “OUT.”

6.

Hold [SHIFT] and press [EXT SYNC]. The Sync/Tempo 
screen appears in the display.

fig.08-12

7.

Use [

], [

], [

], and [

] to move the 

cursor to “Sync Gen.,” and use the TIME/VALUE dial to 
change the setting.

Sync Gen. (Sync Generator)

This setting determines what type of MIDI signal is 
generated at the MIDI OUT connector on the VS-1680. 
For this application, choose “MIDIclk.”

Off:

No MIDI signals are transmitted.

MTC:

MIDI Time Code is transmitted.

MIDIclk:

MIDI Clock messages, as determined by the tempo 
map, are transmitted.

SyncTr:

MIDI Clock messages, as determined by the sync 
track, are transmitted.

8.

Press [PLAY (DISPLAY)] to return to the Playlist display.

9.

Set your MIDI sequencer to follow the MIDI Clock 
messages received from external devices, and to play 
back MIDI song data. When playback begins on the VS-
1680, the MIDI sequencer begins playback as well.

Other Methods to Generate A 
Sync Track or Tempo Map

There may be instances when audio is recorded into the VS-
1680 before a sync track is recorded, or before a tempo map is 
generated. It is possible to create a sync track or tempo map 
to match previously recorded audio. This is helpful when 
you want to record a new MIDI sequence on an external 
sequencer based upon the previously recorded tracks in the 
VS-1680. For example, you might want to program a drum 
machine to add percussion parts to a previously recorded 
live drum track in the VS-1680. If you create a sync track or 
tempo map which matches the live drum track, the MIDI 
sequence will be in sync.

MIDI IN

MIDI Sequencer

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments