Roland VS-1680 V-XPANDED, User Manual, Page: 166 / 282

166
Chapter 12 Song Editing
[F4 (Arng)]:
Moves the cursor back to “Arrange.”
[F5 (Exec)]:
Executes Song Arrange.
[F6 (EXIT)]:
Exits the Song Arrange screen.
* If the time for the new playlist to begin is set at a point earlier
than the previous song end, the original playlist is
overwritten. If the time for the new playlist to begin is set after
the last mark point of the original song, a mark point is set at
the beginning of the new playlist.
9.
Press [F5 (Exec)]. “Song Arrange Sure ?” appears in the
display.
10.
Press [YES]. Or, if you wish to cancel the procedure,
press [NO].
11.
When Song Arrange is completed, the screen returns to
the Playlist display.
Song Split
Song Split allows you to make a copy of a song, and to
specify which tracks (and V-Tracks) are to be included in the
copy. The new song created as a result of Song Split will
include all markers, locators, Automix data, tempo maps,
sync tracks, and system settings from the original song. The
newly created song will have the same song name as the
original song, except with the last character replaced by the
letter A.
Song Split cannot be carried out if there is not enough hard
drive space. Song Split cannot be undone using the Undo
procedure. However, it is possible to delete the newly
created song.
1.
Hold [SHIFT] and press [F1 (Song)]. The Song menu icon
appears.
2.
Press [F1 (Split)]. If “Split” does not appear in the display
above [F1], press [PAGE] until you see “Split,” and then
press [F1 (Split)].
3.
Use [[ ], [ ], [ ], and [ ], or turn the
TIME/VALUE dial to move the cursor to the track you
want to include in the new song. Press [F3 (MARK)] or
press [YES]. The track with the mark next to it will
copied.
fig.11-35
4.
Check the track name by pressing [F1 (SelTr). The Song
Split Select Track screen appears. You can also choose
tracks to be copied in this screen by pressing [F3
(MARK)]. When you are done choosing tracks, press [F1
(Back)].
fig.11-36
Shortcuts for Selecting Tracks During Song
Split
When the cursor is moved to “Track,” you can have
marks simultaneously set or deleted from all selected
tracks. For example, if you move the cursor to the actual
track number column, and press [F3 (Mark)], marks will
be set for all V-Tracks on the selected track. Similarly, if
you move the cursor to the row for the V-Track number
and press [F3 (Mark)], all V-Tracks will be selected. For
example, if you move the cursor to “V-Track 3” and
press [F3 (Mark)], the third V-Track in all tracks will be
marked. Press [F2 (ALL)] to place or remove marks from
all tracks and V-Tracks simultaneously.