Roland VS-1680 V-XPANDED, User Manual, Page: 153 / 282

153
Chapter 10 Track and Phrase Editing
Chapter 10
To (to point)
Specify the time location at which the phrase will be split.
9.
Press [F4 (Exec].
10.
When the display indicates “Complete,” press
[PLAY (DISPLAY)]. You will return to Play mode.
ig.04-63
Phrase Move
This operation moves the specified phrase to another
location on the timeline, or to a different track. This is
convenient for correcting timing mistakes that can occur
when recording.
fig.04-47
Phrase Copy
This operation copies the audio of a specified phrase to
another location. This is convenient when you want, for
example, a four-measure rhythm pattern to loop seamlessly.
Phrase Trim In
This adjusts the point at which the phrase begins without
changing the phrase’s position on the timeline. This is
convenient for trimming the edges of a phrase to be looped.
fig.04-52
Trim In can also be used to correct a manual punch-in done
too early. When you Trim In Phrase 2, the portion of Phrase 1
that was previously covered by Phrase 2 becomes audible.
fig.04-52a
Phrase Trim Out
This adjusts the point at which the phrase ends without
changing the phrase’s position on the timeline. This is
convenient for trimming the edges of a phrase to be looped.
fig.04-56
Trim Out can also be used to correct a manual punch-out
done too late. When you Trim Out Phrase 2, the portion of
Phrase 1 that was previously covered by Phrase 2 becomes
audible.
A'
TO Time
B'
TO Time
A
B
TO Time
TO Time
Phrase 2
Phrase 2
Phrase 1
Phrase 1
TO Time