Roland VS-1680 V-XPANDED, User Manual, Page: 145 / 282

145
Chapter 10 Track and Phrase Editing
Chapter 10
fig.04-18
5.
Press [ ], [ ], [ ], and [ ] to move the
cursor. Set the START and TO values.
A quick way to enter edit points (START, END, FROM, and
TO) is to create a locator for each edit point (p. 45) before
entering the edit screen. Then go to the desired edit screen
(such as Erase, Copy, Cut). You can enter your edit points by
pressing a LOCATOR button and then holding [SHIFT] and
pressing [LOC 1] to enter that point as the START time, [LOC
2] to enter that point as the END time, [LOC 3] to enter that
point as the FROM time, or [LOC 4] to enter that point as the
TO time.
fig.04-19
START (Start Point)
Specifies the start time insert.
TO (To Point)
Specifies the time point the segment will be copied to.
Specifies the destination point.
All V.Tracks
Normally, silence is inserted only on the currently
selected V-Track. If you want silence to be inserted on all
V-Tracks, set this to “On.”
6.
Press [F4 (Exec)]. This executes the Track Insert.
7.
When Track Insert is completed correctly, “Complete”
appears in the display.
8.
Press [PLAY (DISPLAY)] to return to the Playlist display.
If you are unhappy with the edit you made, press [UNDO].
“UNDO Level 1” will be displayed. Press [YES] to restore
your track(s) to their condition prior to the edit.
Track Exchange
This operation swaps the audio data on two tracks.
fig.04-14
1.
Select the V-Track containing the source playback audio
to be exchanged.
2.
Hold [SHIFT] and press [F2 (TRACK)].
3.
Make sure “Track Edit Menu” appears in the display. If it
does not, press [F1 (Tr/Ph)] once.
4.
Press [F4 (Xchg)] for Track Exchange. If you don’t see
“Xchg” above [F4], press [PAGE] until “Xchg” appears,
and then press [F4 (Xchg)].
5.
The track [SELECT] buttons are used to select the source
track(s) and the [STATUS] buttons are used to select the
destination track(s). Press the Track SELECT button to
specify the track to be exchanged. The SELECT button
stops blinking, indicating it is the track to be exchanged.
Press the Track STATUS button for the desired
destination track. The STATUS button turns red. For
example, if you wanted to exchange the audio from
Track 3 to Track 7, you would first press the Track 3
SELECT button, then press Track 7 STATUS.
Track1
Track2
Track1
Track2
A
A
B
B
C
C
D
D
E
E
Time
Example: Exchanging tracks 1 and 2