manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 136 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 136

136

Chapter 9 Automix

Shift

Specify the actual amount (-50–50) by which the Automix 

data values will be increased or decreased.

fig.4-25.e

Expand

Specify the ratio (0.5–2.0) by which the Automix data values 

will be increased or decreased relative to the “Threshold.”

Threshold

When using Expand to increase or decrease the Automix 

data values by a specified proportion, this specifies the center 

value.

fig.4-26.e

11.

To execute the Shift/Expand operation, press [F4 (Exec)]. 

If you press [F6 (EXIT)], you will return to Step 7 without 

executing the Shift/Expand operation.

12.

A message will ask you to confirm. Press [YES]. If you 

press [NO], you will return to Step 11 without executing 

the Shift/Expand operation.

fig.4-27_80

13.

When the Shift/Expand operation has been completed, 

the display will indicate “Complete.” Press 

[PLAY (DISPLAY)].

Erasing Automix Data on 
Specified Channels

1.

Locate to the point where you want to erase the Automix 
data.

2.

Confirm that Automix is on.

3.

Select the channels for which you want Automix erased. 
Hold [AUTOMIX] and press the desired Input SELECT, 
Track SELECT, or SOLO/EDIT buttons so they are 
flashing.

4.

Hold [SCENE] and press [CLEAR]. Automix is erased on 
the selected channels.

Erasing Automix Data

You may end up recording Automix data only to 
immediately decide you want to try it again. Do not try to 
use the UNDO button to erase Automix. Erase Automix data 
using one of the following two methods. 

To Quickly Erase all Automix Data, Including 
Snapshots

This procedure will erase ALL markers in the VS-1680!

1.

Hold [SHIFT] and [CLEAR], and press [TAP]. “Clear All 
Tap Markers?” appears in the display.

2.

Press [YES]. Or, if you wish to cancel the operation, press 
[NO].

To Erase Selected Automix Data

1.

Hold [SHIFT] and press [F6 (UTIL)]. The Utility menu 
icon appears.

2.

Press [F5 (A.Mix)]. If “A.Mix” does not appear above 
[F5], press [PAGE] and then press [F5 (A.Mix)].

3.

Press [F4 (Erase)]. The Automix Erase screen appears in 
the display.

4.

Press [

], [

], [

], and [

] to move the 

cursor, and use the TIME/VALUE dial to change 
settings.

fig.11-14

0 M1

M8

Time

Shift

0 M1

M8

Time

Expand

Threshold

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments