manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 122 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 122

 

122

Chapter 8 EZ Routing

 

Recalling an EZ Routing Template

 

1.

 

Press [EZ ROUTING]. The EZ Routing icon appears in the display.

 

2.

 

Use [

], [

], [

], and [

] or use the TIME/VALUE dial to move the cursor to the routing you want to use.

 

3.

 

Press [F4 (Exec)]. If “Exec” does not appear above [F4], press [PAGE] until you see “Exec” above [F4], then press [F4 (Exec)].

 

fig.02-18

 

4.

 

Press [

] and [

] to move the cursor to “Use Template” and press [F4 (Exec)] once more. “Apply this ROUTING ?” 

appears in the display.

 

5.

 

Press [YES] to recall the EZ Routing settings. (Or, if you wish to cancel the operation, press [NO].)

 

6.

 

Press [PLAY (DISPLAY)] to return to the Playlist display.

 

Deleting an EZ Routing Template

 

1.

 

Press [EZ ROUTING]. The EZ Routing icon appears in the display.

 

2.

 

Use [

], [

], [

], and [

] or use the TIME/VALUE dial to move the cursor to the routing you want to delete.

 

3.

 

Press [F6 (Del)]. If “Del” does not appear above [F6], press [PAGE] until you see “Del” above [F6], then press [F6 (Del)]. “EZ 
ROUTING Delete OK ?” appears in the display.

 

4.

 

Press [YES]. (Or, if you wish to cancel the operation, press [NO].) The EZ Routing is deleted. The four factory templates—
“Recording,” “Mix Down,” “Bouncing” and “Mastering”—cannot be deleted.

 

5.

 

Press [PLAY (DISPLAY)] to return to the Playlist display.

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments