manualshive.com logo in svg

Roland VS-1680 V-XPANDED, User Manual, Page: 121 / 282

Share
Download
Roland VS-1680 V-XPANDED User Manual Download Page 121

121

Chapter 8 EZ Routing

Chapter 8

Using EZ Routing Templates

Saving an EZ Routing Template

1.

When you have pressed the SAVE button after creatinga new setup,the Routing Save screen appears in the display. Turn the 
TIME/VALUE dial to select the number of the desired memory location for your EZ Routing template.

fig.02-17

2.

Press [

] to move the cursor. Use [

], [

], [

], and [

] to move the cursor and the TIME/VALUE dial to 

enter the user EZ Routing’s name.

The function buttons work as shown below:

[F1 (Hist)]:

Pressing this button will take you through a list of the last 20 names entered, one at a time.

[F2 (Clr)]:

Clears all the characters in the window.

[F3 (Del)]:

Deletes the character where the cursor is positioned.

[F4 (Ins)]:

Inserts a space where the cursor is positioned.

[F5 (Write)]:

Stores the routing and exits the Routing Save screen.

[F6 (EXIT)]:

Exits the Routing Save screen without storing the routing.

If you press [NUMERICS/ASCII] so it is lit, you can use the [SELECT] buttons to enter characters in a manner similar to using a 
computer keyboard.

3.

After entering the name, press [F5 (WRITE)]. The routing is saved.

4.

Press [PLAY (DISPLAY)] to return to the Playlist display.

Routing Name

Routing Number

Summary of Contents for VS-1680 V-XPANDED



























































































































































































































































































Reviews:

No comments