Roland VR-4HD, Reference Manual, Page: 10 / 38

Menu List (Setup Screen)
10
Settings for Main Output Audio
(MAIN [SETUP] button)
Setting item Value Explanation
AUX MUTE
OFF , ON (red)
This sets the Mute feature for the AUX bus on or off. Setting this to “ON” mutes out audio output from the AUX bus.
MAIN MUTE
OFF , ON (red)
This sets the Mute feature for the MAIN bus on or off. Setting this to “ON” mutes out the main output audio.
MAIN LEVEL -Inf–10.0 dB This adjusts the volume level of the main output audio
AUX LEVEL -Inf –10.0 dB This adjusts the volume level of audio output from the AUX bus.
PHONES LVL
-Inf–10.0 dB This adjusts the volume level for headphones.
MAIN LIMITER
OFF
, ON This sets the limiter for main output audio on or off.
THRESHOLD -40– -6 –0 dB
This sets the level that becomes the threshold at which the limiter is applied. Compression is applied to audio that
exceeds the threshold. The volume level of audio that is output is limited so as to stay to below the threshold.
PHONES LIMITER OFF
, ON This sets the limiter for headphones output audio on or off.
THRESHOLD -40– -6 –0 dB
This sets the level that becomes the threshold at which the limiter is applied. Compression is applied to audio that
exceeds the threshold. The volume level of audio that is output is limited so as to stay to below the threshold.
EQ HI
-15–
0
–15 dB This boosts or attenuates the high band.
FREQ
1.00–
10.0
–20.0 KHz This adjusts the center frequency when changing the sound quality in the high band.
EQ MID -15–
0
–15 dB This boosts or attenuates the middle band.
FREQ 20.0 Hz– 500 Hz –20.0 KHz This adjusts the center frequency when changing the sound quality in the middle band.
Q 0.5– 1.0 –16.0 This adjusts the width of the frequency band when boosting or attenuating the middle band.
EQ LO -15– 0 –15 dB This boosts or attenuates the low band.
FREQ
20.0–
100
–500 Hz This adjusts the center frequency when changing the sound quality in the low band.
REVERB -Inf–10.0 dB This adjusts the return level from reverb of the audio.
TIME 0.0– 1.5 –5.0 s This adjusts the length of the reverb.
TYPE Room, Hall
This specifies the type of reverb.
Room: Produces the natural reverberations of a highly resonant room.
Hall: Produces reverberations like that of a performance in a concert hall or other such space.
MB COMP OFF , ON This sets multi-band compressor on or off.
HI THRES
-40–
-20
–0 dB
These set the individual levels that become the thresholds for the high, midrange, and low bands at which the
compressor is applied. Compression is applied to audio that exceeds the threshold.
MID THRES -40– -16 –0 dB
LO THRES -40– -20 –0 dB
HI RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1, 1.60: 1,
1.80: 1, 2.00: 1, 2.50: 1, 3.20: 1 , 4.00: 1,
5.60: 1, 8.00: 1, 16.0: 1, INF: 1
* The default value for “MID RATIO” is
“
2.50:1
.”
These set the amount of compression applied in the high, midrange, and low bands. The state in which no
compression is applied is defined as “1.”
MID RATIO
LO RATIO
AUX DELAY 0.0 –500.0 ms This adjusts the delay time for audio output from the AUX bus.
BUS SELECT
— This displays the BUS SELECT Screen (p. 11).
AUDIO FOLLOW — This displays the AUDIO FOLLOW Screen (p. 11).
SOLO CLEAR — This turns off all Solo settings at once.
MUTE CLEAR — This turns off all Mute settings at once.