38
Menu List
AUDIO EFFECTS Menu
Menu item
Value
(bold text: default value)
Explanation
EFFECTS 1–4
(*11)
These settings assign functions to the AUDIO EFFECTS [1]–[4] buttons and specify details of their operation.
ASSIGN
Specifies the function that is assigned to the AUDIO EFFECTS [1]–[4] button.
NONE
No function is assigned.
VOICE CHANGER
Turns the voice changer on/off.
Effect Transforms the pitch or character of the voice that is input from the mic.
PLAYBACK (BGM/SE)
Plays/stops the music file (background music or sound effect).
REVERB
Turns reverb on/off.
Effect Adds reverberation to the sound.
MUTE
Turns the mute function on/off for the audio.
SOLO
Turns the solo function on/off for the input audio.
When ASSIGN = VOICE CHANGER
SW
OFF
, ON
Turns the voice changer on/off.
You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned.
SW MODE
Specifies the operation of the AUDIO EFFECTS button.
MOMENTARY
The effect is on only while you hold down the button, and turns off when you release the button.
LATCH
The effect alternately turns on/off each time you press the button.
TARGET
MIC 1
, MIC 2
Specifies the mic audio to which the effect applies.
PITCH
-12–
+12
Adjusts the pitch of the voice in semitone steps. A setting of “0” is the original pitch.
FORMANT
-10–
+4
– +10
Adjusts the character (formant) of the voice. Settings in the negative (
–
) direction produce a more
masculine vocal character, and settings in the positive (+) direction produce a more feminine vocal
character. A setting of “0” is the original voice.
ROBOT
OFF
, ON
If this is “ON,” the voice is held at a fixed pitch, creating a mechanical robot-like impression.
MIX
0–
100
Adjusts the balance between the unprocessed voice (0) and the voice processed by the effect (100).
LED COLOR
RED, GREEN, YELLOW, BLUE,
MAGENTA, CYAN
Specifies the illumination color of the AUDIO EFFECTS button.
When ASSIGN = PLAYBACK (BGM/SE)
SW
OFF
, ON
Plays/stops the background music or sound effect.
SW MODE
Specifies the operation of the AUDIO EFFECTS button.
MOMENTARY
The effect is on only while you hold down the button, and turns off when you release the button.
LATCH
The effect alternately turns on/off each time you press the button.
AUDIO ASSIGN
Selects the music file that will play. Press the [VALUE] knob to see a list of clips.
BriskAfternoon
Sample clip of background music.
Applause
Sample clip of sound effect (applause).
USB MEMORY
Use a music file saved on the USB flash drive.
Press the [VALUE] knob to view a list of the music files saved in the root directory of the USB flash
drive.
Music files that can be played
Format (extension)
WAV (.wav)
Sample rate
44.1, 48 kHz
Bit depth
16 bits
Number of channels
Stereo, mono
File size
2 GB or less
File name
Up to eight single-byte alphanumeric characters
* The extension “.wav” must be added.
* Music files shorter than 10 ms might not play correctly.
* The VR-1HD plays back the music file directly from the connected USB flash drive. Even if a music
file on the USB flash drive is selected, it will not play unless the USB flash drive is connected.
LEVEL
-INF–10.0dB
Adjusts the playback volume of the music file.
LOOP
OFF, ON
Turns loop playback on/off.
FADE IN
OFF, 0.1–10.0sec
Specifies the fade-in time of the music file.
FADE OUT
OFF, 0.1–10.0sec
Specifies the fade-out time of the music file.
LED COLOR
RED, GREEN, YELLOW, BLUE,
MAGENTA, CYAN
Specifies the illumination color of the AUDIO EFFECTS button.
