58
Using the Controllers
■
Assigning a Function to the Control Pedal
You can change the function that is assigned to the control pedal.
1
To assign the function of the controller pedal connected to the
CONTROL 1 jack, hold down the [BANK] button and press the [PIANO]
button; if assigning the function of the controller pedal connected to the
CONTROL 2 jack, hold down the [BANK] button and press the [E.
PIANO 1] button.
The indicators of buttons [1]–[8] ([1]–[5]) will blink.
2
Press one of the buttons from [1] through [8] ([1] through [5]) to select the
function that you want to assign to the control pedal.
13 different functions can be assigned to the control pedal. You can select any one of
these functions by switching the indicator of the [BANK] button between lit/dark
states.
The following parameters are assigned to each button.
[BANK] button’s indicator is dark
Button
Parameter
Page
[1]
ROTARY SLOW/FAST
The rotary speaker effect can be switched
between slow and fast. This will have the
same effect as the [SLOW/FAST] button.
[2]
ROTARY SPEED
The speed of the rotary speaker effect can
be freely controlled between slow and
fast. This is especially effective when
assigned to the expression pedal.
[3]
ROTARY BRAKE
This button temporarily halts the rotation
of the rotary sound.
[4]
ORCHESTRAL TONES
GLIDE
Controls the Glide function for the
Orchestral Tones. The pitch of the
Orchestral Tones will change while the
control pedal is pressed, and will
gradually return to the original pitch
when the control pedal is released.
[5]
REGISTRATION UP
Steps sequentially through the
registrations. Each time the control pedal
is pressed, the next registration will be
selected.
[6]
REGISTRATION DOWN
Steps sequentially through the
registrations. The registration number
decreases by one each time the control
pedal is pressed.
[7]
OVERDRIVE
The depth of overdrive will be controlled.
This is especially effective when assigned
to the expression pedal.
VK-88_e.book 58 ページ ２００４年４月２０日 火曜日 午前９時０分
