Roland VG-88 Owner'S Manual Download Page 36 | Manualshive

Page: 36 / 84

Roland VG-88 Owner'S Manual Download Page 36

36

Chapter 5. Parameter Guide

COSM GUITAR

By making settings for the various elements that make up the tone of a guitar, you can create a wide variety of sounds.
In addition to setting actual guitar parameters, such as pickup, body, and the pitch of each string, you can also emphasize the
overtone structure, or create sounds using polyphonic effects that process each string individually.

ON/OFF

Switches the COSM guitar on/off.

Selects the COSM guitar type.

VARI GT (variable guitar)

This algorithm lets you make settings for the pickup, body,
and the pitch of each string to specify the sound of the guitar.

(PAGE2)

PICK UP (p. 37)

PITCH SHIFT (p. 39) BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

ACOUSTIC (acoustic guitar)

This simulates the sound of an acoustic guitar.

(PAGE2)

PICK UP (p. 37)

BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

NYLON STRINGS (nylon string guitar)

This is the sound of nylon strings.

(PAGE2)

BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

OPEN TUNE (open tune guitar)

This allows you to create open tunings by modifying the
pitch of each string.

(PAGE2)

PICK UP (p. 37)

TUNE (p. 40)

BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

12STRINGS (12-string guitar)

This shifts the pitch of each string and adds it to the original
sound to simulate a 12-string guitar.

(PAGE2)

PICK UP (p. 37)

DETUNE (p. 41)

BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

PD SHIFT (pedal pitch shift guitar)

This lets you use a pedal to change the pitch.

(PAGE2)

PICK UP (p. 37)

PD SHIFT (p. 41)

BODY (p. 39)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

POLY DIST (polyphonic distortion guitar)

This independently distorts the sound of each string to create
a sound that can be used for chordal playing.

(PAGE2)

PICK UP (p. 37)

POLY DISTORTION (p. 41)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

POLY COMP (polyphonic compressor guitar)

This applies a compressor to each string, providing sustain
for single-note playing and preventing the volume from
diminishing when chords are played.

(PAGE2)

PICK UP (p. 37)

POLY COMPRESSOR (p. 42)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

POLY OCT (polyphonic octaver guitar)

This instrument simulates an octave playing technique.

(PAGE2)

PICK UP (p. 37)

POLY OCTAVE (p. 42)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

POLY SG (polyphonic slow gear guitar)

This simulates a “violin-style” playing technique by fading-
in the volume.

(PAGE2)

PICK UP (p. 37)

POLY SLOW GEAR (p. 42)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

BOWED

This Instrument represents stringed musical instruments
played with a bow.

(PAGE2)

FILTER (p. 43)

P-BEND (p. 43)

SUSTAIN (p. 43)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

DUAL

This Instrument takes the string vibration that is input and
adds both distortion and portions which have the pitch
glided.

(PAGE2)

FILTER (p. 43)

GLIDE (p. 43)

SUSTAIN (p. 43)

(PAGE3)

PAN (p. 45)

MIXER (p. 45)

TYPE

«
...
34
35
36
37
38
...
»

Summary of Contents for VG-88





















































































Reviews:

No comments