6. Network Settings
55
Step 2: Make the Network Settings on the Printer
Important
The addresses used in this section are merely example settings. For detailed information about the settings,
consult your network administrator.
1.
Set the IP address.
Press
.
Press
several times until the screen shown on the
left appears.
Press
in this order.
Press
three times.
[IP ADDRESS]: 192.168.000.XXX
Note: Here, "XXX" can be any number between 2 and 254.
However, be sure to eliminate the number overlapping with the setting you
made in Step 1. Here, "192.168.000.003" shall be entered as an example.
For the part corresponding to "192.168.000," apply the same value as the
setting of your computer.
Use
to select the address number.
Press
.
{
Repeat
and
to set all the address numbers.
|
When you finish making the setting, press
.
Press
.
The screen shown in the figure appears again.
2.
Set the subnet mask.
Press
.
Press
twice.
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
IP ADDRESS
000 . 000 . 000 . 000
IP ADDRESS
192 . 000 . 000 . 000
IP ADDRESS
192 . 000 . 000 . 000
IP ADDRESS
192 . 168 . 000 . 003
NETWORK
IP ADDRESS
NETWORK
IP ADDRESS
NETWORK
SUBNET MASK
Summary of Contents for versaUV lec-540
