Roland VersaStudio BT-12, Operating Instructions Manual

Page: 96 / 234

94
5. Machine Setup Menus

A Full Color Coverage count:
(Full Color Coverage)=(Full Color Coverage (K))+(Full Color Coverage (C))+(Full Color
Coverage (M))+(Full Color Coverage (Y))
Ex.:
Multiple color consumption on a fabric
K: 3%, C: 8%, M: 7%, Y: 2%
(3% + 8% + 7% + 2% = 20%)
Full Color Coverage: 00000020

A coverage ratio calculation for full color printing per page:
(Full Color Coverage)/(Total Full Color)
Ex.:
Total Full Color: 00000888
Full Color Coverage: 00007692
7692 / 888 = 8.7%
Coverage Count. figures are rounded off to one decimal place.
• Black and white files are counted as black and white prints even if color printing was
specified.
• The counter numbers you can check from the [Counter] menu on the display may differ from
the counter numbers that appear on the system configuration page. For details, see page 95
"
Differences Between the Counter and the Total Counter ".
• As the machine prints one sheet, the counter value is incremented by 1. When you set
[Select Print Quality:] to [Vivid] in the printer driver or [Garment Type:] to [Thick Garment],
the counter value is incremented by 2 as the machine prints one sheet.
Displaying the Counter
This section explains how to display the counter.
1.
Press the [ /Menu] key.
2.
Press [ ] or [ /Menu] key to display [Counter], and then press the [#Enter] key.
3.
Press [ ] or [ /Menu] key to display [Show Counter], and then press the [#Enter]
key.
4.
Press [ ] or [ /Menu] key, and then check the [Color:] and [Black:] on the display.
5.
Press the [Escape] key.
Color: 12345678
<Counter>
Show Counter
<Menu>
Counter