Roland VersaStudio BT-12, Operating Instructions Manual

Page: 189 / 234

187
Printing Does Not Start
Printing Does Not Start
If printing fails, check the following:
Check the machine's power.
•
The power lamp is not lit.
Turn the machine on.
See page 22 "
Turning On/Off the Power ".
•
The power lamp does not light up or flash despite the [Power] key being pressed.
Check whether the power cord is plugged into the receptacle properly.
Plug another appliance that works into the receptacle to determine whether the receptacle
is all right.
If the problem persists, unplug the power cord and contact your authorized Roland DG
Corporation dealer.
Check the error message.
•
If the error message appears on the display
See page 203 "Error & Status Messages on the Display".
•
If the error message appears on the Status Monitor
See page 208 "Status Monitor Errors ".
Check the name associated with the printer's icon.
If you share the printer, make sure the name associated with the printer's icon does not exceed
32 characters.
Check the printer driver setting.
On the [Detailed Settings] tab, select [Print Quality], and then select the [Change Data Processing]
check box.
Checking the Version of the Printer Driver
If it is not the latest version, update the driver.
•
Checking the version of the printer driver on a Windows
1. Open the [Printing Preferences] dialog box from the application.
2. On the [Configuration/About] tab, click [About].
3. Check the version.
•
Checking the version of the printer driver on a Macintosh
1. On the [Apple] menu, click [System Preferences...].
2. Click the [Printers & Scanners].
3. Select the printer you want to use from the printer list, and then click [Options &
Supplies...].
4. On the [General] tab, check the displayed version number.
•
Use the Internet to find the latest version of the driver.
See manufacturer's Web site for the latest driver.
•
Update the printer driver.
If you are using Windows, install the downloaded driver and check [Update the current
printer driver] in the dialog box that allows you to select what to install.
If you are using a Macintosh, uninstall the current printer driver before installing the new one.