Roland VersaSTUDIO BN-20A, User Manual

Page: 54 / 120

Setting of Dry Time
This section explains the method of setting the time that the printer needs to wait before it starts
printing or cutting the next page.
Especially, in the case of printing and cutting, ink needs to be sufficiently dried before cutting is start-
ed.
When you make output via the BN-20 driver using a general drawing applica-
tion
Make the following setting in the BN-20 driver first, and then make output from the application.
Procedure
1.
Open [View devices and printers].
• Windows 10
From the start menu, click [Windows System]>[Control Panel]>[View devices and print-
ers].
• Windows 8.1
a. Click [Desk top].
b. Move the mouse to the lower right corner to display Charm and click [Settings].
c. Click [Control Panel]>[View devices and printers].
2.
Right-click the [Roland BN-20] icon, and then click [Printing preferences].
The BN-20 driver’s Printing preferences screen opens.
3.
Set the drying time.
(1)
Select [Dry Time] in [Printer Adjustment].
The appropriate setting time varies according to the media. Set longer time when you use
a medium on which it takes time to dry ink.
(2)
Click [OK].
When the printer starts drying, the remaining dry time is displayed on the utility.
Utility : Other Function
Optimizing the Output Quality
53