Roland VersaSTUDIO BN-20A, User Manual

Page: 102 / 120

MEMO
These are cautionary notes on making output from Adobe Illustrator using the BN-20 driver.
They are not applied when VersaWorks is used.
When you want to print in metallic color and when you want to perform cutting, clear the [Print As Bitmap] checkbox in
the [Print] dialog box.
To display the [Print] dialog box, click [File]>[Print]menu.
Set the document's color mode to [RGB].
If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated. In this case, it may
not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from
Illustrator differ.
Please don't cancel printing by operating Illustrator.
If you cancel printing, press the BN-20 [POWER] key for a few seconds. When you print from Illustrator to BN-20, the now
printing message is displayed. If you click [Cancel] button in the message box, but the printing process is still alive. You cannot
operate the Illustrator untill the end of printing process.
Important Notes When Performing Output from
Adobe Illustrator
Important Notes When Performing Output from General Application
101