Roland VariOS, User Manual, Page: 48 / 168

48
Listening to the demo songs
Playing the demo song
You will use V-Producer’s Locator to play back the songs.
fig.02-locator
1
Click the [Play] button in the Locator to play back the song.
When you play the song, the current time will change.
* If the demo song does not play, read “Q. No sound when you play back the demo song” in the
“Troubleshooting” section (p. 148).
• To stop the song
Click the [Stop] button.
• To move the current location a measure at a time
Click the [Fast-forward] or [Rewind] buttons.
• To change the tempo of the song
Master tempo: Drag the tempo value upward or downward.
Relative tempo: Drag the speed value upward or downward.
* Relative tempo (speed) smoothly adjusts the tempo even while the song is playing. Use this when you
want to make a temporary change in tempo. This will not be saved in the song.
• To transpose the overall playback pitch in semitone steps
Drag the pitch value upward or downward.
Rewind
Current time
Upper value: measure.beat.tick
Lower value: hours:minutes:seconds:frames
To beginning Fast-forward Stop Play
Tempo Pitch Speed
About the demo songs
For the song names and other details, refer to Readme.txt (found in the [Roland] - [V-Producer]
- [DemoSongs] folder).
To power down the VariOS, you must use the procedure described in "Turning the
VariOS on/off" (p. 49). "Turning the VariOS on/off" (p. 49) contains important
information about handling the VariOS, so please be sure to read it.