Roland VariOS User Manual Download Page 14

Page: 14 / 168

Names of Things and What They Do

Front Panel

fig.01-01PanelFront_75

PC Card Slot

This is used when saving VariOS data (p. 122).

PITCH/TIME/FORMANT Knobs

You are free to assign the parameter that will be adjusted by each knob (p. 116). The above
assignments are the power-on defaults.

Indicators

Display

Various information is shown here according to the operations you perform.

MENU Button

Accesses the various functions of the VariOS.

EXIT Button

Returns you to the previously displayed screen (p. 102). Depending on the content of the menu,
this button also functions as

CANCEL

CURSOR Buttons

Used to move the cursor (p. 103).

VALUE Dial

Turn this dial to edit a value. Pressing the

VALUE

dial will function as

ENTER

(confirm). If you

turn the

VALUE

dial while pressing it, the value will change in larger steps (p. 103).

VOLUME Knob

Adjusts the overall volume that is output from the

MAIN OUT

jacks and the

HEADPHONE

jack.

By pressing the

VOLUME

knob you can audition (preview) the current sample.

PHONES Jack

You can connect a set of headphones to this jack. Use headphones with an impedance in the
range of 32–600 ohms.

fig.1-01a

POWER Switch

Turns the power of the VariOS on/off (p. 49). The
power is on when the switch is in the inward
position, and off when the switch is in the outward
position.

PITCH (C1) Knob

Modifies the pitch.

TIME (C2) Knob

Modifies the playback speed (time).

FORMANT (C3) Knob

Modifies the tonal character (formant).

MIDI

Lights when a MIDI message is received.

TEMPO

Blinks at the tempo (p. 106).

Lights when the MIDI mode of the VariOS is “PC” (p. 108).

USB

Lights when connected to a computer via USB.

E F

Power is on when
switch is depressed

Power is off when
switch is released

Summary of Contents for VariOS









































































































































































Search results

Summary of Contents for VariOS

Reviews:

Roland VariOS, User Manual, Page: 14 / 168

Search results

Summary of Contents for VariOS

Reviews: