137
Controlling the VariOS from your
MIDI sequencer
When using the VariOS with your MIDI sequencer (ProTools, Logic,
Cubase, Digital Performer, etc.), you can set the VariOS’s clock source to
“MIDI”
so that the VariOS’s internal tempo will synchronize to the tempo of
your MIDI sequencer.
1
Turn on the power of the VariOS, and load the samples that you want to
play (p. 121).
2
Set the VariOS
clock source
to
“MIDI”
3
Start up your MIDI sequencer.
4
Send the MIDI clock of your MIDI sequencer to
“Roland VariOS MIDI”
(the port of the VariOS sound generator section).
For details on MIDI clock settings in your software program, refer to the
explanation for each program in
read any references to
“Roland VariOS Sync”
as
“Roland VariOS MIDI.”
•
•
•
•
•
Now the internal tempo of the VariOS will be synchronized with the tempo
of your MIDI sequencer.
5
Specify
Roland VariOS MIDI
(the port of the VariOS sound generator
section) as the output port for the tracks of your sequencer, so that it will
control the VariOS.
When you are using V-
Producer, V-Producer will
automatically set the clock
source to “MIDI.”
Summary of Contents for VariOS
Page 98: ...98 Taking advantage of the VariOS Keyboard VariOS Keyboard ...
Page 99: ...99 Operation guide Sound module VariOS ...
Page 124: ...124 VariOS Menu Reference ...
Page 125: ...125 Appendix ...