Roland VariOS User Manual Download Page 130

Page: 130 / 168

130

Synchronization settings

Digital Performer

FreeMIDI settings for using the VariOS

Create the following FreeMIDI Configuration for the VariOS.

fig.05syncDigiPfm01

V-Producer synchronization settings

Select FreeMIDI as the MIDI driver that V-Producer will use.

fig.05syncDigiPfm02

From V-Producer’s

[Option]

menu, choose

“MIDI

Settings...”

In the

FreeMIDI MIDI Settings

dialog box, set

MIDI Driver

“FreeMIDI

Driver.”

fig.05syncDigiPfm03

Click

[OK]

to close the

FreeMIDI MIDI Settings

dialog box.

The explanation in this
manual uses Digital
Performer 3.0. Please be
aware that some screens or
menu names may differ in
other versions.

For details on installing the
FreeMIDI driver for VariOS
and on making FreeMIDI
Configuration settings,
refer to [ReadmeFM-
E.HTM] located in the
[VariOS FreeMIDI Driver-
E] folder on the CD-ROM.

Summary of Contents for VariOS









































































































































































Search results

Summary of Contents for VariOS

Reviews:

Roland VariOS, User Manual, Page: 130 / 168

Search results

Summary of Contents for VariOS

Reviews: