17
Installation and Registration
V-STUDIO 20 is easy to install. All you need to do is choose the folder where the program and sample project files
should be stored. Before you start, make sure you have your serial number handy. Your serial number is located on
the back of the V-STUDIO 20 DVD-ROM case.
1.
Place the V-STUDIO 20 DVD-ROM in your disc drive.
2.
Select “Start-Run” and enter “d:\Guitar Tracks\setup.exe” to start the Guitar Tracks installer.
3.
Follow the installation instructions on the screen.
1.
Place the V-STUDIO 20 DVD-ROM in your disc drive.
2.
Select “Start-Run” and enter “d:\Editor\setup.exe” to start the VS-20 Editor installer.
3.
Follow the installation instructions on the screen.
Before you install V-STUDIO 20, take a minute to register the software so we can let you know when updates become
available and provide you with technical support. Registration is required for continued use of the product. To
register anytime, log onto
http://www.cakewalk.com/register
,
or call 888-CAKEWALK (U.S.) or +1 (617)-423-9004 (outside the U.S.) between 9 AM and 8 PM Eastern Standard Time. If
you live outside of North America, please visit our distributor’s page at
http://www.cakewalk.com/ Dealers/International.asp
to get the telephone number of your local distributor.
You’ll need to supply your serial number, your name, and a valid email address.
Installing V-STUDIO 20 Software
To Install Guitar Tracks 4
To Install VS-20 Editor
Register V-STUDIO 20
VS-20_e.book 17 ページ ２０１０年１月１８日 月曜日 午前９時８分
